List of Publications
by
Prof. Dr. Eng. Kiyoshi Itoh
Sophia University, Tokyo, Japan
[Journal Papers in English]
1. Junya Miyamoto, Ryo Kawabata and Kiyoshi Itoh:
Construction for Ontology of Domain Terms and Tasks (ODT2), Journal of
International Council on Electrical Engineering (JICEE), Vol.3, No.1, pp.79-84,
January 2013.
2. Tad Gonsalves, Kiyoshi Itoh: GA Optimization of Petri
Net-Modeled Concurrent Service Systems, Journal of Applied Soft Computing, Vol.
11, No.5, pp. 3929-3937, July 2011.
3. Manabu Kamimura, Ryo Kawabata, Kiyoshi Itoh: Extraction
of Database Table Design by Transactions, SDPS Journal of Integrated Design &
Process Science, Vol. 14, No.4, pp.39-49, December 2010.
4. Ryo Kawabata, Tadashi Yagame, Kiyoshi Itoh: The
Integrated Environment for Specifying and Reusing Identical and
Different types of Systems Diagrams, SDPS Journal of
Integrated Design & Process Science, Vol. 14, No.1, pp.17-32,
September 2010.
5. Tad Gonsalves, Kei Yamagishi and Kiyoshi Itoh,
Multi-objective optimization in service systems, Journal of Digital Information
Management, Vol. 8, No.4, pp. 255-259, August 2010.
6. Kei Yamagishi, Tad Gonsalves, Kiyoshi Itoh: Service
cost and utilization rate optimization in service systems, SDPS Journal of
Integrated Design & Process Science, Vol. 13, No. 4, pp. 1-8, December 2009.
7. Tad Gonsalves and Kiyoshi Itoh: Minimizing Operational
Cost Using Artificial Immune Algorithm, SDPS Journal of Integrated Design &
Process Science, Vol.13, No. 4, pp. 9-18, December 2009.
8. Ryo Kawabata, Kiyoshi Itoh: Computer-Aided Solid
Geometry Learning (CASGL), SDPS Journal, Vol.13, No. 4, pp. 19-34, December
2009.
9. Tad Gonsalves, Ryo Kawabata, Kiyoshi Itoh: Optmizing
Cost in Software Development Projects, SDPS Journal of Integrated Design &
Process Science, Vol. 13, No. 4, pp. 35-44, December 2009.
10. Manabu Kamimura, Ryo Kawabata, Kiyoshi Itoh:
Extraction of Process Types and Remarkable Steps on Behavior Based Diagrams,
SDPS Journal of Integrated Design & Process Science, Vol. 13, No. 3, pp. 17-37,
September 2009.
11. Tad Gonsalves and Kiyoshi Itoh: Improving The
Prediction Accuracy of Software Development Cost Models, SDPS Journal of
Integrated Design & Process Science, Vol. 13, No. 3, pp. 39-47, September 2009.
12. Tad Gonsalves and Kiyoshi Itoh: Simulation
Optimization of Practical Concurrent Service Systems, in "Intelligent Automation
and Computer Engineering", Springer, 2009, to appear.
13. Tad Gonsalves and Kiyoshi Itoh: Service Optimization
with Patient Satisfaction in Healthcare Systems, Journal of Simulation (JOS),
Vol.3, No.3, Special Issue: Simulation in Healthcare, pp.150-162, September
2009.
14. Tad Gonsalves, Kei Yamagishi, Ryo Kawabata and Kiyoshi
Itoh: Optimizing Software Development Cost Estimates using Multi-objective
Particle Swarm Optimization, in Chapter 3 (pp.45-65) of"AI Applications for
Improved SE Development", the Advances in Intelligent Information Technologies
Book Series, IGI Global, July 2009.
15. Tad Gonsalves, Ryo Kawabata, Kiyoshi Itoh: Performance
Simulation and Design of Petri Net Systems, SDPS Journal of
Integrated Design & Process Science, Vol. 12, No. 4, pp.
27-37, December 2008.
16. Tad Gonsalves, Ryo Kawabata, Kiyoshi Itoh: Task
Segmentation and GA for the Optimization of Software Development
Multi-Project Schedule, ソフトウェア工学の基礎論文集，Vol.15,
November 2008.
17. Tad Gonsalves, Ryo Kawabata, Kiyoshi Itoh: Service
System Performance Ontology, SDPS Journal, Vol. 12, No. 2,
pp. 1-6, June 2008.
18. R. Kawabata, T. Kasahara, and K. Itoh, “The
Description and Retrieval of Diagrams Based on Case Grammar,” Journal
of Integrated Systems, Design, and Process Science, Vol.
12, No. 2, pp. 43-52, June 2008.
19. Ryo Kawabata, Yuki Ishikawa, Kenji Masuda, Kiyoshi
Itoh: The Integrated Environment for Supporting
Collaborative Analysis, SDPS Journal of Integrated Design
& Process Science, Vol. 12, No. 2, pp. 11-26, June 2008.
20. Tad Gonsalves, Ryo Kawabata, Shunya Tabata, Kiyoshi
Itoh: Petri net Tools for the Analysis of Collaborative Tasks,
SDPS Journal of Integrated Design & Process Science, Vol.
12, No. 1, pp. 25-40, March 2008. .
21. Tad Gonsalves and Kiyoshi Itoh: Cost Minimization in
Service Systems using Particle Swarm Optimization, “Software
Engineering, Artificial Intelligence, Networking, and
Parallel / Distributed Computing” in book series “Studies in
Computational Intelligence", pp.151-161, Springer, 2008.
22. Tad Gonsalves, Kiyoshi Itoh, Ryo Kawabata: Composite
Service Model for the Performance Design of Collaborative
Systems, TheATLAS Module Series on Transdisciplinary
Education & Research, Vol.3, No.1, pp. 1-41, 2007.
23. Tad Gonsalves, Kiyoshi Itoh: Performance Design
Rationale Framework, SDPS Journal of Integrated Design & Process
Science, Vol. 11, No. 1, pp. 61-74, March 2007.
24. Ryo Kawabata, Toshiharu Kasahara, Kiyoshi Itoh:
Systems Analysis for Collaborative System by Use Case Diagram,
SDPS Journal of Integrated Design & Process Science, Vol.
11, No. 1, pp. 13-27, March 2007.
25. Tad Gonsalves, Shinichiro Baba, and Kiyoshi Itoh: GA
Optimization of Collaborative Systems, Journal of Advanced
Computational Intelligence and Intelligent Informatics,
Vol.11 No.7, 2007.
26. Ryo Kawabata, Kiyoshi Itoh: Diagrammatic Education for
Software Engineering, SDPS Journal of Integrated Design &
Process Science, Vol. 10, No. 1, pp. 79-92, 2006.
27. Tad Gonsalves, Kiyoshi Itoh: Heuristics and
Qualitative Rules for the Performance Design of Collaborative Systems,
SDPS Journal of Integrated Design & Process Science, Vol.
10, No. 2, pp. 35-44, 2006.
28. Tad Gonsalves, Kiyoshi Itoh: Simulated Annealing in
the Optimization of Collaborative Systems Operation, SDPS Journal
of Integrated Design & Process Science, Vol. 10, No. 3,
pp. 87-95, 2006.
29. Tad Gonsalves, Kiyoshi Itoh: Generic Core Life Cycle
and Conceptual Architecture for the Development of Collaborative
Systems, "Knowledge Sharing in the Integrated Enterprise
(P. Bernus and M. Fox ed.)", pp.417-426, Springer,
2005.
30. Ryo Kawabata, Yuji Senuma, Jun Maruyama, Kiyoshi Itoh:
Evolutional Systems Analysis and its Tool by Effective Use
of Chart Representations, SDPS Journal of Integrated
Design & Process Science, Vol.9, No.1, pp.17-30, 2005.
31. Tad Gonsalves, Ryo Kawabata, Kengo Nakagawa, Yuuki
Ishikawa, Kiyoshi Itoh: Computer-Mediated Collaborative
Engineering System (CMCES) and its Applications to
Education, SDPS Journal of Integrated Design & Process Science,
Vol.9, No.2, pp.13-31, 2005.
32. Tad Gonsalves, Ryo Kawabata, Kiyoshi Itoh, Performance
Design and Improvement of Collaborative Systems by the
application of Knowledge-Based Qualitative Reasoning,
TheATLAS Module Series on Transdisciplinary Education &
Research, Vol.1, No.1, pp. 1-31, November 2005.
33. Ryo Kawabata, Kiyoshi Itoh: Knowledge Representation
and Knowledge Management for Various Phases in Systems
Analysis and Design, Knowledge Based Design, TheATLAS
Module Series on Transdisciplinary Education & Research,
Vol.1, No.2, pp. 1-21, November 2005.
34. Kiyoshi Itoh, Ryo Kawabata, Akiko Hasegawa, Satoshi
Kumagai: Multi-Strata Modeling in MCM and CLM for
Collaborative Engineering, Knowledge and Skill Chains in
Engineering and Manufacturing (E. Arai, et al. , ed.), Springer,
January 2005.
35. Ryo Kawabata, Akiko Hasegawa, Kiyoshi Itoh: Effective
Analysis Method by Reusing MCM for Collaboration Task,
SDPS Journal of Integrated Design & Process Science, Vol.
8, No. 4, pp. 107-118, December 2004.
36. Akiko Hasegawa, Kiyoshi Itoh, Satoshi Kumagai:
Collaboration Engineering Framework for Manufacturing System
Analysis, Modeling and Simulation, SDPS Journal of
Integrated Design & Process Science, Vol. 8, No. 3, pp.49-60,
September 2004.
37. Sanae Sakurai, Ryo Kawabata, Kiyoshi Itoh, Naru Okubo:
Systems Aanalysis by Extended State Transitions Diagram
Based on Lifecycle and Various Attributes of Object, SDPS
Journal of Integrated Design & Process Science, Vol.8, No.2,
pp.122-136, June 2004．
38. Manabu Kamimura , Kiyofumi Inoue, Akiko Hasegawa, Ryo
Kawabata, Satoshi Kumagai, Kiyoshi Itoh : Integrated
Diagrammatic Representations for Data Design in
Collaborative Processes, SDPS Journal of Integrated Design & Process
Science, Vol.7, N0.4, pp. 35-49, December 2003.
41. Satoshi Kumagai, Akiko Hasegawa, Ryo Kawabata, Kiyoshi
Itoh: Building Workflow for Collaboration Task using Multi-
Context Map, Journal of Society of Design and Process
Science, Vol.4, No.3, pp. 49-61, September 2000.
43. Akiko Hasegawa, Satoshi Kumagai and Kiyoshi Itoh:
Collaboration Task Analysis by Identifying Multi-Context and
Collaborative Linkage, CERA Journal, Vol.8, No.1,
pp.61-71, March 2000.
44. Kumagai, S., Shinkai, J. and Itoh, K.: Implementing
Domain Process Model as a Navigator for Cooperative Work
Domain, Journal of Society of Design and Process Science,
Vol.3, No.3, pp.53-74, September 1999.
47. Kazuyuki Komichi, Mitsuya Sakamoto, Yasuhisa Tamura,
Kiyoshi Itoh: ATM Network design by rule base for
interrelationships of performance parameters, Journal of
Society of Design and Process Science, December 1998.
48. Satoshi Kumagai, Kiyoshi Itoh: Designing Collaborative
Work in IDEF0 using Interface Model, CERA Journal, Vol.6,
No.4, pp.333-343, December 1998.
54. Honiden, S., Uchihira, N. and Itoh, K.: An Application
of Artificial Intelligence to Object-Oriented Performance Design
for Real-Time Systems, IEEE Transactions on Software
Engineering, vol.SE-20, No.11, pp.849-867, November 1994.
57. Itoh, K. and Konno, T.: An Integrated Method for
Parameter Tuning on Synchronized Queueing Network Bottlenecks by
Qualitative and Quantitative Reasoning, IEICE Transactions
on Information and Systems (電子情報通信学会),
Vol.E75-D, No.5, pp.635-647, September, 1992.
58. Itoh, K., Tamura, Y. and Honiden, S.: TransObj:
Software Prototyping Environment for Real-Time Transaction-Based
Software System Applications, International Journal of
Software Engineering and Knowledge Engineering, Vol.2, No.1
pp.5-30, March,1992.
70. Itoh, K., Tabata, K., and Ohno, Y.: Software Design
Process: Chrysalis Stage under the Control of Designers, Journal of
Information Processing, Vol.7, No.1, pp.5-15, March 1984.
71. Hayashi, I., Itoh, K., and Suzuki, S.: Man-Machine
Interactive Guidance for Urban Railway Networks, International
Journal of Computers and Graphics, Vol.7, No.1, pp.59-72,
April 1983.
72. Itoh, K., Matsui, M., Muramatsu, K. and Suzuki, S.:
Graphical Editing and Analysis System for Network System (Geans),
International Journal of Computers and Graphics, Vol.6,
No.2, pp.47-61, March 1982.
[Award]
2017 Albert Nelson Marquis Lifetime Achievement Award April 2017
Best Paper Award, ICEE2014 (International Conference on
Electrical Engineering 2014), Takuma Sasaki, Ryo Kawabata and Kiyoshi Itoh:
Reuse Method for Petri Net Based on Structure and Semantics, June 2014.
Lifetime Service Award by Society for Design & Process
Science (SDPS), June 9, 2010.
Certificate of Merit for 2009 IAENG International
Conference on Artificial Intelligence and Applications, <paper> Tad Gonsalves
and Kiyoshi Itoh: Swarm Intelligence in the Optimization of Concurrent Service
Systems, March 2009.
SDPS Fellowship Award by Society for Design & Process
Science (SDPS), June 7, 2007.
Distinguished Service Award by Society for Design &
Process Science (SDPS), June 26, 2006.
［Books in
English］
Kiyoshi Itoh, Toyohiko Hirota, Satoshi Kumagai ed.: Domain
Oriented Systems Development: Perspectives and Practices, Taylor &
Francis, (2002).
Kiyoshi Itoh, Toyohiko Hirota, Satoshi Kumagai, Hiroyuki
Yoshida: Domain Oriented Systems Development: Principles and Approaches, Gordon
and Breach Science Publishers, (November 1998).
[Papers presented at International
Conferences］
1. Masato Kanasashi, Ryo Kawabata, Kiyoshi Itoh: Domain
Ontology Elicitation by Analysis of Diagrammatical Systems
Specification, ICEE2016, July 2016.
2. Kanata Sasaki, Ryo Kawabata, Kiyoshi Itoh: Extraction
of E-R Diagrams including Resource and Event Types of Entities
by Transaction Analysis, ICEE2016, July 2016.
3. Yosuke Hirashima, Ryo Kawabata and Kiyoshi Itoh:
Methodology for Domain Model Based OLTP Systems
Development, SDPS2015, November 2015.
4. Ryo Kawabata, Kanata Sasaki, Katsuya Araki, Kiyoshi
Itoh: A Method for Acquiring E-R Diagram by Transaction
Analysis, SDPS2015, November 2015.
5. Takuma Sasaki, Ryo Kawabata and Kiyoshi Itoh: Reuse
Method for Petri Net Based on Structure and Semantics,
ICEE2014, June 2014.
6. Ryo Kawabata, Junya Miyamoto, Junya Katoh, Kiyoshi
Itoh: Domain Ontology Oriented To Systems Analysis,
SDPS2013, October 2013.
7. Katsuya Araki and Kiyoshi Itoh: Presentation Title: E-R
Diagram Acquisition by Transaction Analysis, ICEE2012, July
2012.
8. Junya Miyamoto and Kiyoshi Itoh: Presentation Title:
Construction for Ontology of Domain Terms and Tasks (ODT-
Square), ICEE2012, July 2012.
9. Takashi Saito and Kiyoshi Itoh: Response System for
State Transition Paths, ICEE2012, July 2012.
10. Ryoji Tanabe, Tad Gonsalves and Kiyoshi Itoh:
Interactive ACO Algorithm toward Practical IEC Application Fields,
AsiaSim2011, November 2011.
11. Ryoji Tanabe, Tad Gonsalves and Kiyoshi Itoh:
Interactive Ant System, JSST2011, October 2011.
12. Tad Gonsalves and Kiyoshi Itoh: Customer satisfaction
and cost optimization in service systems, 5th Indian International
Conference on Artificial Intelligence (IICAI-11), December
2011.
13. Ryoji Tanabe, Tad Gonsalves and Kiyoshi Itoh: A new
node-selection procedure for solving TSP using the ACO
algorithm, SDPS 2011, June 2011.
14. Kazunosuke Tomaru , Tad Gonsalves and Kiyoshi Itoh:
Searching process-analysis diagrams database using the Artificial
Immune System, SDPS 2011, June 2011.
15. Kamimura, Manabu; Kawabata, Ryo; Itoh, Kiyoshi: Reuse
of Behavior Based Diagrams in Software Development, SDPS
2011, June 2011.
16. Tad Gonsalves and Kiyoshi Itoh: Improving customer
satisfaction using the Artificial Immune System, 2011 IAENG
International Conference on Artificial Intelligence and
Applications, March 2011.
17. Tad Gonsalves and Kiyoshi Itoh: Optimal Staff
Allocation using Particle Swarm Optimization, 5th IASTED International
Conference on Computational Intelligence, August 2010.
18. Kiyoshi Itoh, Toward Integrating Methodology for
Domain Oriented Systems Development, Plenary Speech, SDPS2010,
June 2010.
19. Junya Katoh, Ryo Kawabata and Kiyoshi Itoh:
Construction and Visualization of System Ontology for Enhancing
Reusability and Understandability, SDPS IDPT2010, June
2010.
20. Ryo Kawabata, Tadashi Yagame, Kiyoshi Itoh: The
Integrated Environment for Specifying and Reusing Identical and
Different types of Systems Diagrams, SDPS2010, June 2010.
21. Tad Gonsalves and Kiyoshi Itoh: Effective Cost
Management in Software Development Projects, The ATLAS T3 Annual
Meeting, May, 2010.
22. Tad Gonsalves, Kei Yamagishi and Kiyoshi Itoh:
Delivering Optimal Customer Satisfaction In Services, The ATLAS T3
Annual Meeting, May, 2010.
23. Tad Gonsalves, Kiyoshi Itoh: Multi-Objective
Optimization for Software Development Projects, International Multi-
Conference of Engineers and Computer Scientists 2010
(IMECS2010), March 2010.
24. Tad Gonsalves and Kiyoshi Itoh: Operational Cost
Optimization using Artificial Immune System, IICAI09, December
2009.
25. Junya Katoh, Ryo Kawabata and Kiyoshi Itoh: Commitment
Network Based Approach to Ontology Construction, SDPS
IDPT2009, November 2009.
26. Manabu Kamimura, Ryo Kawabata, Kiyoshi Itoh: Capturing
Process Types and Remarkable Steps on Behavior Based
Diagrams, SDPS IDPT2009, November 2009.
27. Tad Gonsalves and Kiyoshi Itoh: Service cost and
waiting time: a multi-objective optimization scenario, ICADIWT2009,
August 2009.
28. Ryo Kawabata, Tadashi Yagame, Kiyoshi Itoh:
Knowledge-Based Method for Conversion and Reuse of Identical and
Different Types of Diagrams, as INVITED PAPER, SETP2009,
July 2009.
29. Tad Gonsalves, Kei Yamagishi, and Kiyoshi Itoh:
Simultaneous optimization of service cost and waiting cost in service
systems, 2009 International Conference on Artificial
Intelligence and Pattern Recognition (AIPR-09), July 2009.
30. Tad Gonsalves and Kiyoshi Itoh: Swarm Intelligence in
the Optimization of Concurrent Service Systems, 2009 IAENG
International Conference on Artificial Intelligence and
Applications, as Certificate of Merit, March 2009.
31. Tad Gonsalves Kiyoshi Itoh: Optimization of Concurrent
Service Systems, SCIS&ISIS2008, September 2008.
32. Ryo Kawabata, Atsushi Ito, Kiyoshi Itoh: A system for
supporting the allocation of personnel to multi-projects, 4th
International Symposium on Management, Engineering and
Informatics (MEI 2008), June 2008.
33. Tad Gonsalves, Teruhiro Tagomori and Kiyoshi Itoh:
Service Systems Performance Ontology, IDPT2008, June 2008.
34. Tad Gonsalves, Kei Yamagishi and Kiyoshi Itoh:
Collaborative Systems Optimization using ACO, IDPT2008,
June 2008.
35. Ryo Kawabata, Kiyoshi Itoh: Domain Ontology and Domain
Heuristics for Engineering and Education, IDPT2008,
June 2008.
36. Tad Gonsalves, Atsushi Ito, Ryo Kawabata, Kiyoshi
Itoh: Swarm Intelligence in the Optimization of Software
Development Project Schedule, 3rd IEEE International
Workshop on Engineering Semantic Agent Systems (ESAS
2008), July 2008.
37. Tad Gonsalves, Ryo Kawabata and Kiyoshi Itoh: Towards
a New Transdiciplinary Architecture for Knowledge Based
Systems, IDPT2007, June 2007.
38. Tad Gonsalves, Keigo Shiiba and Kiyoshi Itoh:
Performance Simulation and Design of Petri Net Systems, IDPT2007,
June 2007.
39. Yuta Toyohara, Ryo Kawabata, Kiyoshi Itoh: Timed STDS
for Analysis of Collaboration Task, IDPT2007, June 2007.
40. Toshiharu Kasahara, Ryo Kawabata, Kiyoshi Itoh: The
Description and Retrieval of Diagrams
Based on Case Grammar, IDPT2007, June
2007.
41. Ryo Kawabata, Hiroyoshi Ohmoto, Yuichi Yano, Kiyoshi
Itoh: Computer Aided Solid Geometry Learning,
ECAD/ECAE'06, October 2006.
42. Tad Gonsalves and Kiyoshi Itoh: Optimization of
Collaborative Systems Operation using Genetic Algorithm, Joint 3rd
International Conference on Soft Computing and Intelligent
Systems and 7th International Symposium on advanced
Intelligent Systems (SCIS & ISIS 2006), September 2006.
43. Tad Gonsalves and Kiyoshi Itoh: Simulated Annealing in
the Optimization of Collaborative Systems Operation,
IDPT2006, June 2006.
44. Ryo Kawabata, Yuuki Ishikawa, Kiyoshi Itoh: The system
for supporting collaborative analysis, IDPT2006, June 2006.
44. Tad Gonsalves, Kiyoshi Itoh：
Heuristics and Qualitative Rules for the Performance Design of Collaborative
Systems,
IDPT2005, June 2005.
45. Ryo Kawabata, Kiyoshi Itoh, Toyohiko Hirota, Satoshi
Kumagai: Effective Diagrammatical Systems Analysis using the
Interrelationships among Use Case Diagrams, Petri Nets and
IDEF0 Diagrams, IDPT2005, June 2005.
46. Kiyoshi Itoh, Takashi Fuji, Satoshi Kumagai, Toyohiko
Hirota, Ryo Kawabata: Educating How to Find Primary Objects
in Systems Analysis Methodologies, IDPT2005, June 2005.
47. CUI Wei-hua, Gang-yan Li, Kiyoshi Itoh, Wang Hui: The
Study on Modeling Method for Collaboration Design Process
Based on MCM & CLM, IDPT2005, June 2005.
48. Toshiharu Kasahara, Atsuo Ohsone, Ryo Kawabata,
Kiyoshi Itoh: Systems Analysis for Collaborative system by Use
Case Diagram, IDPT2005, June 2005.
49. Ryo Kawabata, Kiyoshi Itoh: Diagrammatic Education for
Software Engineering, IDPT2005, June 2005.
50. Ryo Kawabata, Kiyoshi Itoh: Knowledge Management and
Knowledge Representation for Systems Analysis, IDPT2005,
June 2005.
51. Satoshi Kumagai, Toyohiko Hirota, Ryo Kawabata,
Kiyoshi Itoh: Role-responsibility analysis for cross organizational
business process modeling - Multi-disciplinary
diagrammatic representations for project management, ProMAC2004,
October 2004.
52. Tad Gonsalves, Kiyoshi Itoh: Generic Core Life Cycle
and Conceptual Architecture for the Development of Collaborative
Systems, IFIP DIISM2004, October 2004.
53.Toyohiko Hirota, Satoshi Kumagai, Ryo Kawabata, Kiyoshi
Itoh: Conceptual Data Modeling Based on Petri Nets,
JCKBSE04, August 2004.
54. Yuuki Ishikawa, Kengo Nakagawa, Ryo Kawabata and
Kiyoshi Itoh: Development and Evaluation of Computer-Mediated
Collaborative Engineering System (CMCES), ICEE2004, July
2004.
55. Kenji Masuda, Ryo Kawabata and Kiyoshi Itoh: Tool for
Supporting MCM Reuse in Analysis of Collaboration Task,
ICEE2004, July 2004.
56. Ryo Kawabata, Shunya Tabata, Kiyoshi Itoh: System
Analysis and its Tools for Collaboration Task by Petri Net, 2004
IDPT Symposium on System Design and Software Engineering,
July 2004.
57. Shuuzou Kishima, Kiyoshi Itoh: Dual-Triads: Reference
Model for Functional Distribution of Instrumentation and Control
System, 2004 IDPT Symposium on System Design and Software
Engineering, July 2004.
58. Tad Gonsalves, Kiyoshi Itoh, Ryo Kawabata: Use of
Petri nets in the Performance Design and Improvement of
Collaborative Engineering Systems, 2004 IDPT Symposium on
System Design and Software Engineering, July 2004.
59. Tad Gonsalves, Kiyoshi Itoh, Ryo Kawabata: Perspective
Allocating Qualitative Function for Performance Design and
Improvement of Collaborative Engineering Systems,
ECEC2004, April 2004.
60. Ryo Kawabata, Kengo Nakagawa, Tad Gonsalves, Kiyoshi
Itoh: Computer-Mediated Collaborative Engineering System
(CMCES), ICSSEA2003, December 2003.
61. Ryo Kawabata, Takehiro Yamamiya, Kiyoshi Itoh: Method
for Ontology Elicitation in Reactive System Domain,
IDPT2003, December 2003.
62. Yuji Senuma, Ryo Kawabata, Kiyoshi Itoh: Evolutional
System Analysis and its Tool by Effective Use of Chart
Representations, IDPT2003, December 2003.
63. Ryo Kawabata, Akiko Hasegawa, Kiyoshi Itoh: Effective
Analysis Method by Reusing MCM for Collaboration Task,
IDPT2003, December 2003.
64. Atsuo Ohsone, Ryo Kawabata, Kiyoshi Itoh: Development
of Computer Mediated Collaboration System (CMCS),
IDPT2003, December 2003.
65. Sanae Sakurai, Ryo Kawabata, Kiyoshi Itoh, Naru Okubo:
Systems Aanalysis by Extended State Transitions Diagram
Based on Lifecycle and Various Attributes of Object,
IDPT2003, December 2003.
66. Takehiro Yamamiya, Shinichi Aizawa, Yuji Senuma, Ryo
Kawabata, Kiyoshi Itoh: Domain Model and its Analysis
Navigator for Reactive systems on STD Triad, IDPT2003,
December 2003.
67. Akiko Hasegawa, Kiyoshi Itoh, Satoshi Kumagai:
Collaboration Engineering Framework for Manufacturing System
Analysis, Modeling and Simulation - Efficient
Manufacturing System by Collaborative Integration of Principal and
Auxiliary Tasks - IDPT2003, December 2003.
68. K. Itoh, R. Kawabata, A. Hasegawa, S. Kumagai:
Multi-Strata Modeling in MCM AND CLM for Collaborative
Engineering, DIISM2002, November 2002.
69. Naru Okubo, Sachiko Tanaka, Ryoji Mogi, Kiyoshi Itoh：The
Sophia University CALL Project: Developing multimedia-
assisted learning resources with student participation,
IDPT2002, June 2002.
70. Ryo Kawabata, Shinichi Tokuda, Manabu Kamimura, Akiko
Hasegawa, Satoshi Kumagai, Kiyoshi Itoh: Effective
Systems Analysis by Reusing Different Kinds of Chart
Representations, IDPT2002, June 2002.
71. Ryo Kawabata, Shinichi Tokuda, Manabu Kamimura, Akiko
Hasegawa, Satoshi Kumagai, Kiyoshi Itoh: Integrated
Collaborative & Concurrent Engineering Environment,
IDPT2002, June 2002.
72. Ryo Kawabata, Kiyofumi Inoue, Satoshi Kumagai, Kiyoshi
Itoh: A Two-Faceted Systems Specification Method toward
Collaborative Systems Engineering, ICSSEA2001, December
2001.
73. Manabu Kamimura, Naoyuki Kato, Ryo Kawabata, Satoshi
Kumagai, Kiyoshi Itoh: Extracting E-R models from
Collaboration Analysis Method MCM/CLM, Humacs2001 in
ER2001, November 2001.
74. Akiko Hasegawa, Satoshi Kumagai, Kiyoshi Itoh:
Collaboration Engineering Analysis for Manufacturing System,
CE2001, July 2001.
75. Akiko Hasegawa, Satoshi Kumagai, Kiyoshi Itoh:
Application of Collaboration Task Analysis Method to Design Process,
JSST2000, November 2000.
76. Manabu Kamimura, Satoshi Kumagai, Kiyoshi Itoh:
Extracting E-R models from IDEF0 diagrams, CE2000, July 2000.
77. Satosi Kumagai, Ryo Kawabata, Akiko Hasegawa, Kiyoshi
Itoh,: Integrated Environment for Collaboration Engineering
by Collaboration Interface Model, 5th IDPT (World Congress
on Integrated Design and Process Technology), June 2000.
78. Yoshitaka Tomita, Satoshi Kumagai, and Kiyoshi Itoh:
Stepwise Construction Method of IDEF3 for Collaboration
Domain, 5th IDPT (World Congress on Integrated Design and
Process Technology), June 2000.
79. Ryo Kawabata, Satoshi Kumagai, Kiyoshi Itoh: A
Navigation Method for Detection and Correction of Specification Errors
on Chart Representations, 5th IDPT (World Congress on
Integrated Design and Process Technology), June 2000.
80. Akiko Hasegawa, Kiyoshi Itoh, Satosi Kumagai:
Collaboration Task Analysis by Identifying Multi-Context and
Collaborative Linkage, CE'99, September 1999.
81. Kazuyuki Komichi, Kiyoshi Itoh: Methods for
link-Capacity Estimation in ATM Networks, 4th IDPT (World Congress
on Integrated Design and Process Technology), July 1999.
82. Kiyoshi Itoh, Satoshi Kumagai: Key Concepts for
Practical Application of Domain Specific Approach, 4th IDPT (World
Congress on Integrated Design and Process Technology),
July 1999.
83. Ryo Kawabata, Kiyoshi Itoh, Satoshi Kumagai:
Prototyping based on Domain Analysis and Modeling, 4th IDPT (World
Congress on Integrated Design and Process Technology),
July 1999.
84. Kiyofumi Inoue, Satoshi Kumagai, Ryo Kawabata, Kiyoshi
Itoh: Multi-Context Map Representation of Collaboration Process in AP221 for
Plant Engineering, IFIP CAPE'97 (Computer Aided Production Engineering),
September 1998.
85. Satoshi Kumagai, Akiko Hasegawa, Kiyoshi Itoh:
Designing Collaborative Work Process in IDEF0 using Interface Model,
CE'98, July 1998.
86. Satoshi Kumagai, Akiko Hasegawa, Ryo Kawabata, Kiyoshi
Itoh: Describing Collaboration Task using Muti-Context
Map, CE'98, July 1998.
87. Kazuyuki Komichi, Mitsuya Sakamoto, Yasuhisa Tamura,
Kiyoshi Itoh: ATM Network Design Using Design Rationale
and Linearity between Performance Parameters, 3rd IDPT,
pp., July 1998.
88. Kiyoshi Itoh, Naoki Hiratsuka: A Method for Judging
the Existence of Primitive Solids Generated from the Orthographic
Views by Pseudo Boolean CSP, 3rd IDPT, July 1998.
89. Satoshi Kumagai, Akiko Hasegawa, Ryo Kawabata, Kiyoshi
Itoh: A Domain Model for Collaborate Work using Multi-
Context Map, 3rd IDPT, July 1998.
90. Ryo Kawabata, Kiyoshi Itoh: System Analysis by
Navigator for Collaboration Task and Trading Task, SCS ECEC'98
(European Concurent Engineering Conference), April 1998.
91. Satoshi Kumagai, Kiyoshi Itoh: Domain Analysis and
Modeling for Concurrent Engineering in Plant Monitoring and
Operations, IEEE Compsac'97, pp.450-453, August 1997.
92. Ryo Kawabata, Yasuhisa Tamura, Kiyoshi Itoh, Norio
Tomii: Concurrent Work Specification for Co-related Assignment
Tasks with Domain-oriented Abstraction, SCS CEE'97
(Concurrent Engineering in Europe), pp.133-140, April 1997.
93. Kiyoshi Itoh, Jiro Shinkai, Satoshi Kumagai, Shuzo
Kishima: A Method for Domain Analysis and Modeling of
Cooperative Work, SCS CEE'97 (Concurrent Engineering in
Europe), pp.37-44, April 1997.
94. Itoh,K. and Suzuki,S.: Model Construction from
Orthographic Views as Pseudo Boolean Constraint Satisfaction Problem,
2nd IDPT (World Congress on Integrated Design and Process
Technology), pp.76-83, December 1996.
95. Itoh,K., Kishima,S.and Tamura,Y.: Triadic Domain
Model-Based Development of Software Systems, ICSR'94 (3rd
International Conference on Software Reuse), November
1994.
96. Itoh,K., Kishima,S.and Tamura,Y.: Systems Integration
on Specification, Design and Generation of Reactive System –
Triadic Domain Model-Based Approach -, ICSI'94 (3rd
International Conference on Systems Integration), pp.1082-1095, August 1994.
97. Miki,M., Tamura,Y., Hirai,T., Kakumu,T. and Itoh,K.:
Performance Prototyping for Real-Time System with Qualitative
Parameter Tuning Methods, IFIP/IFAC WRTP'94 (Workshop on
Real-Time Programming), June 1994.
98. Itoh,K.: Integration of Real-Time System Prototyping
with Qualitative and Quantitative Parameter Tuning Methods,
International Workshop on Qualitative Reasoning about
Physical Systems (QR94), pp.156-163, June 1994.
99. Itoh,K.: Systematic Integration of Real-Time System
Prototyping with Qualitative and Quantitative Parameter Tuning Methods on the
basis of Synchronized Queueing Network, WCES'94 (World Congress on Expert
Systems), January 1994.
100. Kishima,S. and Itoh,K.: Asdreas: Architecture for the
Specification and Design of Reactive Systems, 1993 Joint
Conference on Software Engineering, November 1993.
101. Itoh,K.: Systematic Integration of Qualitative and
Quantitative Parameter Tuning Methods for Improving Real-Time
System Prototypes by AI Techniques, IEEE ICSI'92
(International Conference of Systems Integration), pp.54-65, June
1992.
102. Itoh, K. : TransObj: Prototyping
Environment for Function and Performance of Real-Time Transaction-Based Software
Systems, 14th IEEE ICSE, <Abstract>, pp.84-85, May1992.
103 .Honiden, S., Uchihira, N. and Itoh, K :
OOPD: Object-Oriented Performance Design, 14th IEEE ICSE (International
Conference of Software Engineering), <Abstract>, pp94-96,
May 1992.
104. Honiden,S., Uchihira, N. and Itoh,K.: An Application
of Artificial Intelligence to Prototyping Process for Performance
Design in Real-time Systems, ESEC'91 (European Software
Engineering Conference), pp.189-209, October, 1991.
105. Itoh,K., Honiden,S., Shida,K. and Konno,T.:
Qualitative Reasoning-Based Parameter Tuning on Bottleneck of
Synchronized Queueing Network, IEEE Compsac'91,
pp.307-314, September 1991.
106. Honiden,S., Uchihira, N., Matsumoto,K. and Itoh,K.: A
Prototyping Process for Performance Design in Real-time
Systems, InfoJapan'90, Vol.1, pp.103-110, October 1990.
107. Itoh,K., Honiden,S., Sawamura,J. and Shida,K.: Role
of Qualitative and Quantitative Reasoning in Diagnosis and
Improvement for Queueing Network Bottleneck, InfoJapan'90,
Vol.2, pp.171-178, October 1990.
108. Itoh,K., Sawamura,J., Honiden,S. and Shida,K.:
Knowledge-Based Parameter Tuning for Queueing Network Type
System -A New Application of Qualitative Reasoning, IFIP
CAPE'89 (Computer Aided Production Engineering),
pp.206-212, October 1989.
109. Itoh,K., Sawamura,J., Honiden,S. and Shida,K.:
Knowledge-Based Diagnosis on Simulation Result for Queueing
Network, Beijing International Conference on System
Simulation and Scientific Computing, pp.471-476, October 1989.
110. Yamashita,H., Itoh,K. and Suzuki,S.: Simulation Study
Evaluating Automatic Production Lines with Different
Operating Principles and Configuration Parameters, JSST
Conference on Recent Advances in Simulation of Complex
Systems, pp.470-476, July 1986.
111. Itoh,K., Ishikawa,M., Fujiu,T. and Suzuki,S.: A
method for Solid Construction from Engineering Draft in Orthographic
View, JSST Conference on Recent Advances in Simulation of
Complex Systems, pp.204-211, July 1986.
112. Tamura,Y. and Itoh,K.: Software Prototyping Using
Simulation Language, JSST Conference on Recent Advances in
Simulation of Complex Systems, pp.44-51, July 1986.
113. Itoh,K., Tabata,K., Kubo,M. and Ohno,Y.: Interactive
Modeling and Simulation System, IEEE 8th International
Conference of Cybernetics and Society, November 1978.
114. Itoh,K., Tabata,K., and Ohno,Y.: An Evaluation System
for Concurrent Processes by the Traversing Method, 3rd USA-
Japan Computer Conference, pp.41-45, October 1978.